Cable Test Set

MODEL CTS-1	SPECIFICATIONS
INPUT	240 V, 60 Hz, single phase, approx. 20 A maximum
CABLE UNDER TEST	Maximum 4 wires, plus ground, plus armour
NO. OF CABLES	Maximum 10
CONTINUITY TEST	1 to 6 tests, selectable One wire (hv) to all others (ground)
VOLTAGE	0-3 kV ac
CURRENT	to 1A
TRIP	95-1000 mA adjustable in 2 ranges
TIME	1-60 s adjustable (from inside back panel)
INDICATOR LAMPS	Test Selected TEST ON GOOD or BAD for each test Cable Selected GOOD or BAD for each cable HV ON (individual wires - 40 lamps) READY MAIN POWER CONTROL POWER	} for tests on an individual cable - ON - LINE FAULT - ON - SAFETY SWITCH OK
OTHER PANEL CONTROLS	START CONTINUE CABLE ADVANCE LAMP TEST SET HV CHECK LEAKAGE RESET (key switch) Trip Current Sensitivity (2 ranges, with switch) ADJUST HIGH VOLTAGE Main power circuit breaker (plus 3-A fuse for control power)	} push buttons } push buttons
METERS	Voltmeter 0-3 kV ac Ammeter 0-1 A ac Accuracy ą2% of full scale
SPECIAL FEATURES	Safety interlock switch on rear door of cabinet. Provision for external safety interlock switches.
SIZE	75W x 185H x 71Dcm (approx.) (30W x 73H x 28D in.)
	Goto top of Page